Arctic Freezer 7 X/7 X Co | Installation On Intel 1700/1200/115x

Freezer 7 X/7 X CO – Intel Installation

This video demonstrates the step-by-step installation of the Freezer 7 X/7 X CO on Intel 1700 using the Intel retention ring and 4 retention pins. Now included in the box with the Freezer 7 X/ 7 X CO Rev.3

Main specifications:

COMPATIBLE WITH INTEL & AMD SOCKETS

The Freezer 7 X/7 X CO is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.

PRE-APPLIED MX-4 THERMAL PASTE

Pre-applied, high-performing MX-4 thermal paste ensures quick and clean assembly.

LONGER LIFESPAN THANKS TO IST LOW COIL TEMPERATURE

In theory, reducing the coil temperature by 10 °C can double the service life. With the use of new ARCTIC fan motors, we were able to lower the temperature by 20 °C, which quadrupled the lifespan oft he fans.

OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION

The direct-touch heat pipes attached to the Freezer 7X/7 X CO and an optimized design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-FAN FOR INCREASED PERFORMANCE

Inspired by the P-series, the Freezer 7 X / 7X CO fan benefits from all of the advantages of P-fans:

High static pressure for increased cooling performance
Broad RPM range
Lower power consumption
Less vibration
PWM for synchronous fan control

FLUID DYNAMIC BEARING

Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

DIRECT TOUCH HEATPIPES

This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

DOUBLE BALL BEARING CONSTRUCTED FOR CONTINUOUS OPERATION (CO VERSION)